A Pacific storm is bringing areas of low elevation rain, moderate to heavy mountain snow, and high winds to the Northwest. Strong Santa Ana winds and very dry conditions are producing elevated to critical fire weather conditions in southern California. Isolated strong to severe thunderstorms are possible through early Wednesday morning across parts of northeast Texas into western Tennessee. Read More >
Please Wait ... OL Maps Rendering | ||||||
Note that some data may not be current when not at briefing time. Click on Surface or Jet Stream images to refresh to latest image.
For the Airmets/Sigmets, blue is for icing, darker green for high-level turbulence, lighter green for low-level turbulence, and purple for IFR.
Click on "New Print Worksheet" or "Old Print Worksheet" to print only the table below (this normally will fit to a double-sided page). If there are problems with "Print Worksheet" (eg, maps do not finish rendering), please use "Printable Worksheet". For the background shading on the back page, you'll need to select "Background graphics" when printing (under "More settings" in Chrome).
Click on "Printable Worksheet" to open only the table below in a new window (this normally will fit to a double-sided page), and then use CTRL-P or CTRL-SHIFT-P to manually print.
An "automated" PIREP table is available which is based on AIRMETs, SIGMETs, PIREPs, CWAs, TAFs, METARs, TCF, SREF, etc, but this should not be used alone without referencing the separate sources.
The PIREP requirements can be update manually on this page by clicking on the regular (not automated) table. The time stamp will be removed if you do this.
To change the model for the Jet Stream WAVE Image graphics, you can add click the "Toggle Jet Stream Models" above (there will be a delay). To auto load with NAM (https://www.weather.gov/zse/ZSEWorksheet?nam), GFS (https://www.weather.gov/zse/ZSEWorksheet?gfs), BIG (https://www.weather.gov/zse/ZSEWorksheet?big), or AWC (https://www.weather.gov/zse/ZSEWorksheet?awc). HRRR (https://www.weather.gov/zse/ZSEWorksheet?hrrr) is the default. You can still toggle among the different times and types with "Toggle Surface/Jet Stream Maps".
To use the WR copies of the Jet Stream and Satellite/Surface Maps, add "alternate" to the URL parameters or click here: https://www.weather.gov/zse/ZSEWorksheet?alternate .
You can change the printing opacity for the graphics (OpenLayers Maps, Jet Stream Map, Surface Map, and background colors in PIREP Requirements Table) with "Printing Opacity" to reduce toner/ink usage.
Hovering over the "automated" boxes will indicated the referenced sources.
A button for toggling on/off the PIREP Count table and duplicate PIREP Requirements table (which would print on the back of the page) is available at the bottom.
If you wish to try the older (OLv3) version from before the reformat, go to https://www.weather.gov/zse/ZSEWorksheet3 .
|
ZSE AREA OPERATION PLANNING WORKSHEET OS/CIC: | ||
Icing | Turb | IFR |
TRAFFIC MANAGEMENT/MILITARY
PEAK TRAFFIC TIMES:SPECIAL ACTIVITIES: RWY / ARRIVAL RATES: SEA: / BFI: / PDX: / CFR: METERING: ROUTES: GDP: MIT: MILITARY OPERATIONS: |
EQUIPMENT OUTAGES: |
BRIEFING TIMES/LOCATION: |
ELMS DUE: |
COLLATERALS/MEETINGS: |
|
SHIFT EMPLOYEES: ENTER INITIALS & CHECK ✓ FOR TEAM & PRE-DUTY WX |
PA, TTM, CSC, SET, OSA: |
TRAINEES/POSITIONS: |
https://www.weather.gov/zse/ZSEWorksheet |
Please note that the G-AIRMET +hour below is from the forecast issuance time, and not from the current time. It also will default to the "current" time if the +hour is before the current time. | ||||
Icing: | Turbulence: | IFR: |