National Weather Service United States Department of Commerce

Active Weather for the West, Warming in the East

The potential for heavy snow at higher elevations in the western U.S. will continue for many spots through the weekend. In the meantime, the eastern half of the continental U.S. will transition to above normal temperatures ahead of a pair of cold fronts next week that will bring readings back to closer to normal as we approach Thanksgiving Day. Read More >

Telecommunication Operations Center

National Program

Meteorological Time Definition - The use of the Universal Time Constant for meteorological & hydrological data

Weather.gov > Telecommunication Operations Center > Meteorological Time Definition - The use of the Universal Time Constant for meteorological & hydrological data
 

Meteorological Time Reference

Time of Day and Meteorological Data

U.S. Naval Observatory Master Clock


Select the USNavy Time in Standard Time Zones to obtain the current time

The time expressed in hydrometeorological products is important for correct interpretation for their use and also varies according to the product. The time in all hydrometeorological products is expressed according to a single standard, which is the Universal Coordinated Time (UTC) (formerly known as Greenwich Mean Time [GMT] or Zulu {zero} Time [Z]). Midnight (0000 UTC) starts the 24 hour clock at the zero meridian.

The time expressed in surface observations is the time the observation is completed. In order to allow comparison of surface conditions at the same time throughout the world, the groups regulating the collection of hydrometeorological data have established a standard time for taking observations. These observations will have times observed within the 10 minutes preceding the UTC standard time. Hence surface observations for meteorological use have timestamps reflecting 0000, 0300, 0600, 0900, 1200, 1500, 1800, 2100 UTC. Observations taken for use by aviation interests are taken at least once an hour. Some countries specify that aviation observations which may be used beyond the local area will be taken every 30 minutes. For these 30 minute observations, the standard time for taking them will vary from country to country.

Routine forecasts are transmitted according to an international standard and are valid for a specific period of time. Within a bulletin containing forecasts the time of preparation, time of transmission and valid period are expressed. These times [the times of preparation, transmission and the forecast valid time] are expressed in UTC. For instance, most forecasts for airports are prepared and transmitted 30 minutes prior to the beginning of the valid period. Hence, the time in the bulletin heading will be the standard time, usually ending in minutes of zero (00), and the first time within the forecast will be the preparation time and will end in 30, representing 30 minutes after the hour. A four-digit group expressing the valid time of the forecast in even hours will also be included. A forecast ending at midnight will see 24 as the hour and a forecast beginning at midnight will use 00 for the hour.

Weather warning and other plain language forecast products use the time of preparation again expressed in UTC. Local times may be referenced in the content of the product.

The U.S. National Weather Service base all data and product times on the UTC standard. The meteorological community uses this time standard which is the recommended international time standard to be used taking observations for exchange and for defining the time for forecast products world-wide. The agreements were established by Nations in the World Meteorological Organization and the International Civil Aviation Organization forums. A common practice is to include a time of the observation or event denoting the time with a following capital letter " Z " to indicate the time as UTC.